Posted in

how to safely move a forklift

If you’re a warehouse manager, operations lead, or even just someone who’s ever had to move a forklift—whether it’s across your own facility, to a job site, or to a repair shop—you know it’s not as simple as hitching it to a pickup and driving. I’ve been in the forklift game for over 12 years now, selling, servicing, and helping folks move these heavy machines every single day, and let me tell you: most people get this wrong. That’s why I’m putting this together today, no fancy jargon, no corporate fluff—just real, tested steps to keep you, your team, and your forklift safe every single time. Forklift

First off, let’s get one thing straight: forklifts aren’t cars. They’re top-heavy, have tiny turning radiuses, and most standard models weigh 3,000 lbs minimum—some of the big rough-terrain ones hit 10,000 lbs easy. Ignore that, and you’re asking for a wrecked truck, a scratched forklift, or way worse, someone getting hurt. I’ve seen a guy try to haul a 5,000 lb counterbalance forklift on a regular trailer without securing the mast (that big vertical arm part, for the new folks) and it shifted 15 miles down the road, crashing through a guardrail. He was lucky no one was in the lane next to him. That’s the kind of mistake we’re here to avoid.

Start with the pre-move prep, because 90% of the problems happen here. Before you even think about hitching up, do a full walkaround check on the forklift itself. First, drain any fluids you don’t need for transport: hydraulic oil, fuel, coolant. Wait, why? Because if a line leaks during transport, that’s not just a mess—it’s a fire hazard, and leaking fluids can make the forklift slippery if you have to unload quickly. I usually tell customers to drain the hydraulic tank to about 25% capacity, and for gas or diesel models, empty the tank to under 10 gallons. Propane? Make sure the tank is secured, shut off tight, and capped—no loose valves swinging around while you drive.

Next, adjust the forklift’s own parts for transport. This is non-negotiable. Tilt the mast all the way back, then lower the forks as far as they’ll go—no exceptions. If the forks stick up even a few inches, they can catch on overpasses, tree branches, or even the back of your trailer when you’re driving. I once had a customer move a forklift 20 miles with forks extended 3 feet; they got stuck on a railroad overpass, dented the forks, and ended up paying $800 in repair fees. Don’t be that guy. Also, turn off the key, set the parking brake (double-check that it’s actually engaged—sometimes they feel loose), and remove the key from the ignition. Stupid, but I’ve seen someone forget that, and the forklift rolled off the back of the trailer during transport because the brake popped loose.

Now, the transport method—this is the big one, and it depends on where you’re moving the forklift. Most short moves, like around your own warehouse or to a lot down the street, you might use a flatbed trailer or a pickup with a heavy-duty bed. Wait, pickups? Only if your forklift is small—like a 3,000 lb electric pallet jack lift or a mini counterbalance. Anything bigger needs a proper flatbed, not a dump truck or an open car trailer. Car trailers aren’t built for 5,000 lbs of heavy machinery; they’ll flex, bend, and possibly break in half. I’ve had to send a tow truck to pick up a customer’s broken car trailer that tried to haul a 6,000 lb forklift—cost him way more than a proper flatbed rental would have.

If you’re moving long-distance, say across state lines, you might need a lowboy trailer, especially for rough-terrain forklifts that have bigger tires and higher ground clearance. Lowboys are lower to the ground, so you don’t have to worry about lifting the forklift too high to load, which reduces the risk of tipping during loading. And for love of all things, don’t cut corners on the trailer’s weight rating. Check the GVWR (gross vehicle weight rating) of the trailer—needs to be at least 20% higher than your forklift’s total weight. If your forklift plus attachments is 7,000 lbs, get a trailer rated for at least 8,400 lbs. No exceptions.

Loading and unloading is where most people mess up, too. This isn’t just driving the forklift up the ramps and calling it a day. First, make sure your ramps are rated for the forklift’s weight, too—double that, actually, because ramps take a beating. Wooden ramps are fine for small lifts, but metal ramps are way better for anything over 4,000 lbs. They’re less likely to slip, and they’re designed for heavy loads. Also, angle the ramps correctly—steeper than a 15-degree slope is a no-go. If your ramp is so steep that the forklift’s front wheels are lifting off the ground when you drive up, that’s a tip hazard. I always tell customers to test the ramp angle with a small load first before driving the full forklift up.

When you’re loading, drive the forklift straight onto the trailer, dead center. Don’t turn the wheel mid-ramp, don’t angle it—straight, all the way. Stop when the rear wheels are on the trailer, never all the way at the edge. Once it’s on, set the forks down all the way, but leave a little gap between the forks and the trailer’s floor so they don’t scrape when you turn the trailer. Now, securing the forklift—this is another big mistake I see all the time. People use a couple of ratchet straps and call it good. No. You need at least four tie-downs, two on the front and two on the rear, not just the forks. The forks can bend, or the forklift can slide off the forks, so tie down the frame itself, not just the forks. Use heavy-duty ratchet straps—rated for at least 10,000 lbs each, even if your forklift is 5,000 lbs. Tighten them until the forklift can’t move at all—no side-to-side, no front-to-back. Test it by pushing the top of the mast gently; if it wiggles, you need to tighten the straps more. Also, add wheel chocks in front of the front tires and behind the rear tires, even if the straps are tight. Chocks are cheap, and they add a second layer of safety.

Wait, what about electric forklifts? I get asked this all the time—moving electric lifts vs gas. The prep is almost the same, but you have to be extra careful with the battery. Make sure the battery is secured in its compartment, not just sitting loose. If it’s a lead-acid battery, it’s heavy, and if it shifts during transport, it can crack and spill acid. Also, cover any exposed battery terminals with a plastic cap to prevent short circuits. For lithium-ion batteries, make sure they’re not damaged—no dents, no frayed cables—before moving. I had a customer whose lithium battery got a small dent during loading, and it shorted out mid-transport, sparking and melting part of the trailer. That’s a $10,000 mistake he could have avoided with a quick pre-move check.

Now, what if you don’t have a trailer, or the forklift is too big to move yourself? That’s where hiring a professional forklift transport service comes in. A lot of people think this is an unnecessary cost, but let me break it down: if you damage your forklift, you’re looking at $2,000-$10,000 in repairs. If you get in a crash on the road, you’re looking at even more—property damage, possible injuries, legal fees. A good transport service has the right trailers, the right straps, and trained drivers who know how to move forklifts. I’d rather you pay $300 for a transport service than $10,000 to fix a wrecked forklift and pay for someone’s hospital bill.

I also get a lot of questions about moving a forklift short distances around the warehouse, like from one bay to another. That’s a different scenario, right? No trailer, no road driving. For that, you still need to follow safety rules. First, clear the path—no pallets, no boxes, no people walking through. Slow down, don’t speed around corners. Keep forks low, mast tilted back. And always, always sound your horn before moving, especially if there are people around. I’ve seen a forklift run over a part-time worker who didn’t hear it because the operator didn’t honk. That’s avoidable.

Now, common mistakes to avoid, because these come up every single week with customers. First, don’t overload the forklift on the trailer. Even if your forklift is 5,000 lbs, if you have a 1,000 lb attachment on the forks, that adds to the total weight. Don’t exceed the trailer’s GVWR. Second, don’t use rope or bungee cords to secure the forklift. They stretch, they break, and they’re not rated for heavy loads. Ratchet straps are non-negotiable. Third, don’t forget to check the local traffic laws. Some states have rules about moving heavy equipment on public roads—you might need a permit, or a escort vehicle, especially if the forklift is over a certain height or weight. I’ve had a customer get a $500 ticket for moving a forklift across town without a permit. Don’t skip that check.

Another thing: weather. If it’s raining, snowing, or the roads are icy, don’t move a forklift unless it’s absolutely necessary. Forklifts have small tires, so they’re way more likely to slide on wet roads than a regular car. Even if you’re just moving it around the warehouse, wet floors are a hazard. Wait for the weather to clear, or if you have to move it, add extra chocks and slow down way more than you normally would.

Now, let’s wrap this up. Moving a forklift isn’t rocket science, but it is serious. It’s about taking the time to do the prep right, not cutting corners on straps or trailers, and putting safety first every step of the way. If you’re not comfortable doing it yourself, or you need a new forklift for your facility, that’s what we’re here for. We don’t just sell machines—we help our customers move, maintain, and use their forklifts safely, because that’s what this job is all about. If you’re gearing up to move a forklift, or you’re looking to upgrade your fleet, hit us up to chat. We can walk you through the best transport options, answer any questions, and make sure you’ve got everything you need to get the job done right, no stress, no mistakes.

Wait, one last quick tip: after you get the forklift to its new location, don’t just unhitch and drive away. Wait 10 minutes, check the straps again, check the fluid levels, make sure there’s no damage from transport. That final check can save you a headache later. I’ve seen someone unload a forklift and drive off, only to find a broken hydraulic line leaking all over the new facility’s floor an hour later. That’s the kind of thing that happens when you rush the last step.

At the end of the day, forklifts are tools that make jobs easier, but they’re heavy, powerful machines. Respect that, take the time to do it right, and you’ll avoid 99% of the problems I see out there. If you need help with anything—whether it’s figuring out the right transport setup for your forklift, or shopping for a new one to fit your needs, don’t hesitate to reach out. We’re here to make sure you and your team stay safe, and your operations run smooth.

References

Forklift OSHA. (2020). Powered Industrial Truck (Forklift) Safety Standards. Occupational Safety and Health Administration.
National Institute for Occupational Safety and Health (NIOSH). (2019). Heavy Equipment Transport Safety Guidelines for Warehouse Operations. Centers for Disease Control and Prevention.
American National Standards Institute (ANSI). (2021). Safety Standard for Powered Industrial Trucks (ANSI B56.1). ANSI.
Motor Carrier Safety Administration (FMCSA). (2022). Guidelines for Transporting Heavy Industrial Equipment on Public Roads. U.S. Department of Transportation.


Jiangsu SIDA Power Machinery Group Co., Ltd.
Jiangsu SIDA Power Machinery Group Co., Ltd. is one of the most professional forklift manufacturers and suppliers in China, featured by quality products and good price. Please rest assured to buy high-grade forklift from our factory.
Address: NO.66, Zhongxing East Road, Luoshe Town, Huishan District, Wuxi City, Jiangsu Province
E-mail: hwsy@jssd-power.com
WebSite: https://www.sida-engine.com/