Hey there – if you’re here, odds are you’re either tinkering with a small project (maybe a custom robotic arm, a portable workshop tool, or even that tiny conveyor for your workshop setup) and stuck on figuring out the torque of the small electric motor you’re eyeing, or you’re a fellow builder coming to our little corner of the web for straight, no-nonsense answers. I’m not a rocket scientist, but I’ve spent the last 10 years helping folks source reliable small electric motors for all kinds of random jobs – from high school robotics teams to small manufacturing startups – so let’s cut through the jargon, okay? No stuffy equations that make your eyes glaze over, just real, workable steps. Small Electric Motors

First, let’s get one thing straight: torque for a small electric motor isn’t the same as what a car engine puts out. Car torque is huge, measured in pounds-feet, but for our tiny motors – think the ones that run 12V up to 48V, most common for personal and small commercial use – torque is usually in inch-pounds or even newton-millimeters, and it matters way more than raw speed. If you grab a motor that’s got 10,000 RPM but only 2 inch-pounds of torque, it’ll spin fast but can’t lift a 1-pound weight attached to a pulley. If you get 5 inch-pounds at 2,000 RPM, it’ll lug that weight around all day without dying. That’s the key tradeoff we’ll circle back to.
Let’s start with the easiest scenario: if you’re already buying a motor from a supplier like us (shameless plug, but I know, I know – let’s back that up with facts first), most good small motor makers list torque right on the spec sheet. But wait – you need to know what kind of torque they’re talking about, because that’s where most people mess up. There’s no such thing as “one torque number fits all” for motors, so let’s define the three big ones you’ll see:
- Stall torque (aka locked rotor torque): This is the max torque the motor can put out when it’s spinning at 0 RPM – like if you clamp the motor shaft tight and crank up the power. This is super important for startup, like when a robotic arm first moves from a dead stop, because that’s when your motor has to work the hardest. A lot of builders mistake stall torque for normal running torque, and that’s a recipe for a burnt-out motor.
- Running torque (aka rated torque): This is the steady torque the motor puts out when it’s at its rated voltage and running at its rated speed. This is the number you actually need for most continuous jobs, like driving a conveyor belt that’s moving at a constant speed.
- Peak torque: The brief, extra-high torque the motor can hit for a split second, like when a robot has to yank a stuck part loose. Don’t rely on this for regular use – it’s for short bursts only.
Now, if your motor’s spec sheet is missing torque (it happens, especially with the cheaper no-name options you might find on some marketplaces) or you’re building a custom setup and can’t wait around for a spec sheet, we can calculate it ourselves – no fancy lab required, just a few basic tools you probably have in your workshop.
Let’s break that down into a step-by-step test you can do at home. First, grab a few things: your small electric motor, a power supply that matches its rated voltage (way too many people try to hook a 12V motor to a 24V battery – don’t do that), a pulley (any size works, just note its diameter), a length of string, a small bucket, and some weights (or even bags of sugar or sand, whatever’s easy).
Here’s the play-by-play:
- First, attach the pulley to the motor shaft – make sure it’s tight, no slipping. Then, tie one end of the string around the pulley, and the other end around the empty bucket.
- Slowly add weight to the bucket until the motor just can’t lift it anymore. That’s the stall torque at your test voltage.
- Now, let’s calculate it. Torque (T) is equal to force (F) times radius (r) of the pulley. Force here is just the total weight in the bucket – make sure to convert it to the right units. For small motors, we usually use inch-pounds, so if your weight is in pounds, just multiply by the radius of the pulley in inches. If you use metric, it’s newton-millimeters: weight in newtons times radius in millimeters.
Wait, let’s make that formula real with an example so it’s not just letters. Suppose my pulley is 2 inches in diameter – that means the radius is 1 inch, right? I add up all the weights in the bucket and it hits 5 pounds before the motor stalls. Torque is 5 pounds times 1 inch, so that’s 5 inch-pounds of stall torque. Easy, right?
But hold up – that’s only stall torque. What if I want running torque? That’s a tiny bit trickier, but still doable. You’ll need a way to measure RPM of the motor – a cheap digital tachometer is like $15 online, nothing fancy. Here’s how:
- First, confirm your motor’s rated voltage and make sure your power supply is dialed to that exact voltage (flickering power messes with torque readings, so plug it into a wall adapter if you can, or use a good battery).
- Run the motor with no load first, measure its unloaded RPM. Let’s say that’s 3,000 RPM for a 12V motor.
- Now, add a load to the motor. Not the bucket method for running load – use a small brake, like a piece of sandpaper pressed against the pulley, or another simple load that lets you adjust how much drag the motor has.
- Keep adding load until the motor’s RPM drops to its rated speed (check the spec sheet – that’s the number they list as “rated RPM”). Now, that’s the point where the motor is putting out its rated running torque.
- To calculate this, you’ll also need to know the motor’s power. Most small motors list power in watts (W) on the spec sheet, which is another number you’ll need if you don’t have a built-in way to measure it. The formula here is: Torque (in newton-meters) = (9550 * Power (in kW)) / RPM. Wait, let’s translate that to inch-pounds because that’s easier for small motors: Torque (inch-pounds) = (63025 * Power (in hp)) / RPM. If you don’t know horsepower, 1 horsepower is 746 watts, so just divide your wattage by 746 to get hp.
Let’s test that with the same example. Suppose my 12V motor is rated at 100 watts, so that’s 0.134 hp. If the rated RPM is 2,000, then torque is (63025 * 0.134) / 2000 = ~4.2 inch-pounds. That lines up almost perfectly with the stall torque number we got earlier, which makes sense because running torque is usually around 70-80% of stall torque for most small brushed motors (the most common type for hobby and small commercial use).
Now, a few super important notes that everyone skips and ends up breaking their motor: first, motor torque depends on voltage. If you run your motor at higher voltage than it’s rated for, you’ll get more torque, but way less lifespan – like, a 12V motor run at 15V will put out 25% more torque, but it’ll burn out in a few weeks instead of a few years. We get so many calls from people who did that for a project and then their motor died, begging for a replacement. Don’t be that person.
Second, the type of motor matters. Brushed DC motors (the most common small motors) have torque that’s proportional to current – more current = more torque. Brushless motors (popular for drones and high-performance robots) are a bit different, they have torque proportional to current too, but you need a motor controller to get accurate readings, because brushless motors don’t work without one. Stepper motors, if you’re using those for precise positioning, have their own torque curve too – they hold torque when stationary, and that drops as speed increases, which is why you have to size them right for your application.
Wait, let’s talk real-world use cases because formulas are useless if you don’t apply them. Let’s say you’re building a small door opener for your workshop that needs to lift 10 pounds, and the pulley you’re using is 3 inches in diameter (radius 1.5 inches). How much torque do you need? That’s 10 pounds * 1.5 inches = 15 inch-pounds of torque, right? But wait – you have to add a safety factor! Always add 20-50% extra torque to cover things like friction in the door hinges, uneven loads, or power drops. So you don’t get a 15 inch-pound motor – you get a 18-22.5 inch-pound motor. That’s the mistake that kills most projects: people calculate exactly what they need and forget that nothing in real life is perfect.
If all this sounds like a hassle, that’s why we’re here as small electric motor suppliers. We don’t just send you a motor and a spec sheet – we’ve helped hundreds of builders size motors correctly over the years, so you don’t have to test, reorder, or wait for replacements. Whether you’re a one-person startup making custom farm equipment, a robotics team coach, or a hobbyist building that cool project in your garage, we’ve got small motors from 5W up to 500W, all with clear, accurate torque specs, no hidden jargon.
But wait, what if you have a weird application? Like a motor for a food processing conveyor that needs to be washdown-safe, or a tiny motor for a portable air pump? We’ve got custom options too, because we don’t just stock off-the-shelf parts – we work with you to get the exact torque, speed, and voltage you need, without charging you a fortune for custom parts.
Let’s wrap this up so you don’t have to scroll through a wall of text. To calculate small electric motor torque, follow this quick cheat sheet:
- Grab the spec sheet first – if it’s there, use rated running torque for continuous jobs, stall torque for startup loads.
- If no spec sheet, do the bucket test for stall torque: weight in pounds * pulley radius in inches = inch-pounds of torque.
- For running torque, use the power/RPM formula, or add a load to bring the motor to its rated speed and work from there.
- Never forget the safety factor – 20% minimum, more if your load is uneven or has friction.
- Match the voltage exactly to avoid burning out your motor early.
And if all that math and testing sounds like it’s eating up time you could be spending building your project? Hit us up. We’re not a big corporate motor company that talks over your head with 10 pages of fine print. We’re a small team of builders and engineers who know how frustrating it is to get a motor that’s too weak or way too strong for your job. We can help you size the right torque, get the right motor, and answer any questions you have, no rushed support or hidden fees. Just reach out, tell us what you’re building, how much weight it needs to move, and what speed you need, and we’ll hook you up.

At the end of the day, torque is what makes your motor do the work, not just spin fast. Skip the cheap no-name motors with vague torque numbers, do the math, add that safety factor, and you’ll have a motor that works for years, not just weeks.
Servo Electric Motors Reference
- Electric Motor Torque: Calculation and Application Guidelines. National Electrical Manufacturers Association.
- Design of Small Electric Motors for Hobbyist and Commercial Applications. International Journal of Engineering Research.
- Workshop Testing Methods for Small DC Motor Performance. Society of Automotive Engineers, Small Motor Division.
Hangzhou Jiangnan Electric Motor Co., Ltd.
Hangzhou Jiangnan Electric Motor Co., Ltd. is one of the most reliable small electric motors manufacturers and suppliers in China, specialized in providing high quality customized service. We warmly welcome you to wholesale small electric motors for sale here from our factory. For price consultation, contact us.
Address: No.298, YaNan Road, Yaqian Town, Xiaoshan District, Hangzhou City, Zhejiang Province
E-mail: sales@jnelectricmotor.com
WebSite: https://www.jnelectricmotor.com/