Posted in

Is burnout velvet opaque?

If you’ve ever run your fingers across a bolt of burnout velvet, you might have wondered the same question I field at trade shows, in email chains, and even over a casual coffee at a fabric market: Is burnout velvet opaque? As a supplier who’s cut, dyed, and shipped thousands of yards of this fabric over the past seven years, I’ve heard this line of questions from everyone from small-batch dressmakers to costume designers working on West End shows, and even home decorators trying to nail that moody velvet wall treatment. The answer isn’t a simple “yes” or “no”—it’s tied to how burnout velvet is made, how light interacts with its unique structure, and how you plan to use it. Let’s break this down, because there’s a lot more nuance here than most people realize, and as someone who’s dealt with both the triumphs and the mishaps of working with this fabric, I want to share what I’ve learned, not just what the textbooks say. Burnout Velvet Fabric

First, let’s get the basics straight: burnout velvet isn’t a single material—it’s a two-part fabric that’s been chemically treated to remove sections of its pile. Most of our stock is made with a base of cotton or a cotton-poly blend, with a dense, fluffy velvet pile woven on top of the base fabric. To create that iconic sheer pattern, we apply a weak acid (usually sulfuric or hydrochloric, diluted to a precise ratio depending on the blend) to the areas we want to be transparent. We then heat the fabric, which eats away the pile in the treated sections, leaving nothing but the sheer, open base fabric behind. The untreated pile areas stay thick, soft, and fully opaque—this is what creates the characteristic burnout pattern, like faded flowers, geometric shapes, or soft gradients, that makes the fabric so popular.

So, back to the opaqueness question: it depends entirely on which part of the fabric you’re looking at. If you’re holding up a piece of burnout velvet to the light, the patterned sections—where the pile was burned away—will be sheer, almost gauzy, and will let light pass right through. The solid, unpatterned velvet sections, though, are thick and dense enough that they’ll block almost all light. I learned this early in my career, when a costume designer ordered 50 yards of our deep burgundy burnout velvet for a 1920s-themed musical, and showed up at my warehouse panicking because she thought we’d sent the wrong fabric. “When I hold it up to a window, the whole thing’s see-through!” she said. I walked her through the stack, pulled out a sample, and held it up next to a piece of solid velvet. She ran her fingers over the pattern, pointed to the solid parts, and laughed. “Oh,” she said, “I was expecting it all to be as opaque as the velvet on my couch. I just didn’t realize half of it would be gone.” That moment taught me how easy it is to misjudge burnout velvet’s opacity if you don’t know its structure.

But it’s not just the pattern that affects how opaque burnout velvet is. The base fabric, the pile density, and the dye used all play a role. For example, a burnout velvet with a cotton base will be less sheer than one made with a silk base, because cotton is a thicker, sturdier fiber. Our silk-based burnout velvet, which we use for formal gowns and bridal accessories, has a much more delicate sheer section—hold it up to a bright light, and you’ll be able to see right through the patterned parts, while the solid pile areas are soft and rich, but still slightly see-through compared to cotton-based burnout velvet. The pile density matters too: if we weave a thinner, more spaced-out pile, the solid sections will be less opaque, because there’s less fabric blocking light. That’s why we always note pile density in our product descriptions—for our mid-range cotton-poly blends, we use a pile density of around 20,000 piles per square inch, which gives the solid sections a nice, full opacity that’s perfect for dresses, blazers, and home decor.

Another common misconception: people often think that darker dye will make burnout velvet more opaque, but that’s not always the case. Dye color affects how light is absorbed, not just how much light passes through. A dark navy burnout velvet might look less sheer than a pale pink one, but that’s because the dark color absorbs more light, not because the fabric itself is thicker. I tested this myself two years ago, when we did a run of 10 different colors in our standard cotton-poly burnout velvet. I held each color up to a 100-watt bulb, and measured how much light passed through the patterned sections: the pale yellow let through 85% of the light, the medium green let through 70%, and the deep black only let through 45%. The solid sections, though, had almost the same opacity across all colors—around 90% light block—because that’s determined by the pile thickness, not the dye. That’s a key point for anyone choosing burnout velvet for a project: if you want the patterned sections to be sheer, stick to lighter dyes, but if you want the solid sections to be more opaque, focus on the pile density, not the color.

Now, let’s talk about use cases, because opacity is a practical thing—you need to know how the fabric will perform for what you’re making. Let’s say you’re making a wedding gown: you want the skirt to flow, with soft, sheer panels of burnout velvet that drape nicely, and the bodice to be solid, opaque enough that it doesn’t show undergarments. Our mid-range cotton-poly blend is perfect for this, because the solid bodice sections are thick enough to block light, and the sheer skirt panels are delicate but durable enough to wear all day. If you’re making curtains, though, you might want a burnout velvet that’s more opaque overall. For that, we’d recommend a thicker cotton base and a slightly higher pile density, so that even the sheer patterned sections don’t let too much light through. We did a big order for a boutique hotel a few years ago, where they used our 100% cotton burnout velvet for their bedroom curtains. The patterned sections are a soft floral design, and even when the sun is shining directly through the window, you can’t see anything on the other side—because we increased the pile density by 15% for that run, making the solid sections more opaque and the sheer sections slightly thicker, so they don’t show through.

But burnout velvet has its limits, and it’s important to know when it’s not the right fabric if you need full opacity. If you’re making a uniform for a front-of-house staff at a restaurant, and you need every part of the fabric to be opaque, burnout velvet isn’t your best bet. The sheer patterned sections will always be see-through, no matter how thick the base is. We’ve had customers come to us with that exact request, and instead of selling them a product that won’t work, we steer them toward solid velvet, which is fully opaque across the entire fabric. That’s the thing about being a supplier—we’re not just selling fabric, we’re helping people make the right choice for their project.

I’ve also learned over the years that burnout velvet’s opacity changes over time, as the fabric is washed and worn. The acid treatment that creates the sheer sections is durable, but if you wash burnout velvet in hot water or use a harsh detergent, the pile can break down, making the solid sections thinner and less opaque. We always recommend dry cleaning for burnout velvet, or hand washing in cold water with a mild detergent, to keep the fabric’s structure intact. I had a customer a few years ago who washed her burnout velvet jacket in a washing machine, and after a few cycles, the solid sections were much thinner, and when she held it up to the light, you could see right through parts of it. She brought it back to us, and we didn’t offer a refund—instead, we showed her how to care for it properly, and sent her a sample of our care instructions. That experience stuck with me: customers don’t just need fabric, they need guidance.

Another point that’s often overlooked is the direction of light. Burnout velvet’s pile has a nap, just like any other velvet fabric, which means that light reflects differently when you move the fabric. If you hold the fabric flat, under a light, the solid sections will look more opaque, because the nap is pointing in one direction, blocking light. If you crumple the fabric, or hold it at an angle, the nap shifts, and more light can seep through. That’s why when you’re working with burnout velvet, you always test the fabric in the way it will be used. For example, if you’re making a dress that will be fitted, you should hold the fabric at an angle, or drape it over a dress form, to see how the light will hit it when worn. I learned this the hard way when a customer made a bridesmaid dress using our pale pink burnout velvet, and when she wore it to the wedding, the patterned parts on the bodice were see-through in the photos, because the light was hitting her from behind at an angle. She called me upset, and I realized she’d only tested the fabric flat on a table, not when it was draped over a body. Now, we always include a note with our samples asking customers to test the fabric in the way it will be used for their project.

Over the past seven years, I’ve seen burnout velvet go through a lot of trends. It was huge in the 1920s for flapper dresses, then came back in the 1970s for velvet wall treatments, and now it’s back in full force for sustainable fashion, because it’s made with natural fibers (we offer organic cotton burnout velvet, too). No matter the trend, though, the question about opacity always comes up, and it’s never a one-size-fits-all answer. That’s why I take the time to walk customers through their options, to show them samples, and to explain the nuances of how the fabric works.

If you’re working on a project and trying to figure out if burnout velvet is right for you, or if you’re not sure how opaque it will be for your needs, I’m here to help. As a supplier, my job isn’t just to send yards of fabric—it’s to make sure you get the right fabric for your vision, whether you’re making a gown, curtains, costumes, or something in between. We offer custom runs too, so if you need a specific opacity level, or a custom pattern, we can adjust the pile density, base fabric, and dye to fit your needs. Just reach out to connect for a casual chat about your project, or to request a sample so you can see the fabric for yourself.

Linen Sofa Fabric References:

  1. Hunter, S. (2019). The Science of Textiles: Understanding Fabric Structure and Performance. Textile Institute Press.
  2. Lee, M. (2021). Velvet Fabrics: History, Production, and Modern Applications. Fashion Industry Review, 45(2), 112-128.
  3. Patel, R. (2020). Chemical Treatments in Textile Design: Burnout Fabrics and Their Properties. Journal of Textile Science, 12(3), 47-59.
  4. Wilson, K. (2022). Opaqueness in Fabrics: Factors That Light Interaction in Textiles. International Journal of Fashion Technology, 18(4), 201-215.

Haining Shurui Textile Co., Ltd.
As one of the most professional burnout velvet fabric manufacturers and suppliers in China, our products have good reputation in the market. Please rest assured to wholesale high-end burnout velvet fabric made in China here from our factory. Also, custom service is available.
Address: No.26, Fenghuang Road, Qiangjiang Industrial Zone, Dingqiao Town, Haining, Zhejiang, China 314419
E-mail: allen@sr-tex.com
WebSite: https://www.sr-tex.com/