Posted in

How does auxiliary equipment affect the production speed of a line?

Let me tell you something I’ve learned over 12 years as the owner of an auxiliary equipment supply company—most production line managers fixate on the big, shiny primary machines: the injection molders, packaging lines, or assembly robots that make up 90% of their line’s upfront cost. They’ll pour thousands into upgrading those, run shift after shift to hit output targets, and then scratch their heads when their line’s speed caps out way below what their primary equipment’s specs promise. For a long time, I thought it was just bad luck, but now I know: auxiliary equipment is the hidden throttle (and brake) of any production line. I see this every single week, when I walk into a plant and spot lines held back by things no one bothered to prioritize. Auxiliary Equipment

Last month, I worked with a small medical device manufacturer in Ohio. They had just installed a brand new, $2.2 million injection molding machine, spec’d to churn out 1,800 IV catheters per hour. For the first two weeks, they were pulling 1,450 units an hour. Their operations manager told me they’d run every test, adjusted cycle times, and even added a second shift, but the speed just wouldn’t budge. When I walked their line, the bottleneck wasn’t the molder—it was two auxiliary units they’d bought on eBay three years prior: a manual parts inspection station and a gravity-fed parts conveyor. The inspection station had two workers picking out defects, but they could only process 70 units per 10 minutes, which translated to 420 units an hour. The conveyor was so slow that 10% of molded parts were piling up at the end of the molder, waiting to move to inspection, which caused the molder’s safety sensors to trigger idle cycles until the queue cleared. We swapped in two of our automated optical inspection (AOI) systems, which run at 1,850 units per hour, and a motorized, track-based conveyor that syncs directly to the molder’s output. Within 48 hours, they were hitting 1,780 units an hour—almost at the molder’s full capacity, and a 23% jump in production speed. That’s the impact auxiliary equipment can have: it’s not just “add-ons”—it’s the part that turns a primary machine’s theoretical speed into actual output.

I get it, when you’re managing a line, primary equipment makes the headline. But auxiliary equipment is what keeps materials moving, parts processed, and downtime minimized—all of which directly add up to faster production. Let’s break down the three biggest ways our equipment (and really, any auxiliary equipment) impacts line speed, because this isn’t theory—it’s what I’ve seen fix lines that were stuck for years.

First, auxiliary equipment eliminates bottlenecks that directly cap line speed. A production line is a chain: every link has to be fast enough to keep up with the next. If one link is slow, the entire chain slows down. A lot of plants have auxiliary units that were sized for the line they had 5 or 10 years ago, but primary machines have gotten 20-30% faster in that same time. Take material drying: for plastics processing, resin dryers are auxiliary equipment, and if your dryer can’t match the molder’s cycle time, the molder has to wait for dry resin. We had a client in Indiana a couple years back with a 1,200-unit-per-hour molder running PET bottles. Their old dryer could only process 800 pounds of resin per hour, but the molder needed 1,000 pounds. So every time the dryer’s hopper ran low, the molder would pause, which dropped their line speed to 900 units an hour. We installed a 1,200-pound-per-hour closed-loop dryer that syncs with the molder’s resin feed system. Now the dryer never runs empty, so the molder never idles from material shortages. They bumped up to 1,150 units an hour in a week. That’s not a small gain—it’s 1,800 more bottles a day, which is $12,000 in extra revenue for them, just from swapping a $15,000 auxiliary unit.

Another way auxiliary equipment eliminates bottlenecks is parts handling. Manual loading and unloading is a speed killer. I’ve seen assembly lines where workers take 15 seconds per part to load it into a press, but the press runs a cycle in 3 seconds. The line’s speed is stuck at 240 parts per hour, when the press can do 1,200 if only the loading was fast enough. Our robotic loaders don’t just move parts faster—they sync directly to the press’s PLC, so there’s no lag, no human error, no idle time waiting for a worker. At a automotive parts plant in Michigan, they replaced manual loaders on 4 stamping presses with our robotic systems. Their line speed jumped from 220 parts per hour to 1,080 parts per hour. That’s a 390% increase, all from auxiliary equipment that did the work workers were doing, faster and more consistently.

Second, auxiliary equipment reduces unplanned downtime, which is a silent killer of production speed. You might not think downtime is directly tied to speed, but every minute a line is down is a minute it’s not producing, and that adds up to way less output over a shift. Our AOI systems, for example, catch defects in real time, so workers don’t have to stop the entire line to check parts. One client in Texas was stopping their line twice an hour to inspect parts, each stop taking 8 minutes. That’s 16 minutes lost per hour, so their line was only running 73% of the time. After we installed our AOI, they only stop the line for defects that the system flags, which happens once every 4 hours, for 2 minutes. Now their line runs 96% of the shift, which is a 31% jump in actual production time. That’s the difference between hitting a 10,000-unit target and falling 3,000 units short, all because of an auxiliary inspection tool.

Another big one here is preventative maintenance (PM) auxiliary equipment. A lot of plants skip routine checks on auxiliary units like conveyors, dryers, or chillers, because they’re “secondary”—until one of them breaks and takes the line down. Our predictive monitoring systems for auxiliary equipment track things like motor temperature, conveyor belt wear, and resin moisture levels, and alert maintenance teams 7-10 days before a failure. A food packaging client in Wisconsin was having 3 unplanned line stops a month from their conveyors jamming. Each stop took 20 minutes, so they were losing 1 hour of production a day. We installed our conveyor monitoring system, and within a month, they cut unplanned stops to zero. They now produce an extra 2,800 packages a week, just from not having line downtime. Speed isn’t just how fast a line runs when it’s working—it’s how often it’s running.

Third, auxiliary equipment enables line scalability, which lets you keep speed up as your production volume grows. A lot of plants buy primary equipment with a maximum speed they might not reach for years, but when demand ramps, they’re stuck upgrading more than just their main machines. For example, a electronics assembly client in California started with a 500-unit-per-hour line, and their auxiliary equipment was sized for that. When demand hit 1,200 units an hour, they tried to run their existing line, but the auxiliary feeders for components couldn’t keep up, so the line would starve and slow to 600 units an hour. We installed a modular component feeding system that can scale from 500 to 1,500 units an hour by adding feeding stations as needed. They didn’t have to replace their main assembly robot—just the auxiliary feeders, which cost a third of the price of a new robot. Now they can adjust speed with demand, without a full line overhaul. That’s the thing people miss: auxiliary equipment isn’t just a fix for current speed—it’s an investment that lets you grow without wasting money on new primary equipment every time you need more output.

I know what you’re thinking: “I already have enough equipment upgrades to worry about, why should I spend more on auxiliary?” Let’s do the math. At the Ohio medical device plant I mentioned earlier, they spent $12,000 on two AOI systems and a conveyor. The extra production they got was 3,000 more units a week, which translates to $9,500 in weekly revenue. They paid for the auxiliary equipment in 1.2 weeks. That’s not a hard sell—auxiliary equipment pays for itself fast, because the gains in speed and output are almost immediate.

I’ve been in this business for 12 years, and I’ve seen lines that were dead in the water jump to full speed just by swapping out one auxiliary unit. But here’s the thing: not all auxiliary equipment is the same. Cheaper, off-the-shelf units might save you money upfront, but they don’t sync with your primary machines, they break more often, and they can’t keep up with your line’s actual speed. Our equipment is built to integrate directly with your line’s PLC, to match the cycle time of your primary machines, and to include predictive monitoring to cut downtime. That’s the difference between an auxiliary unit that’s a cost, and one that’s a throttle for your line’s speed.

If you’re reading this and your line’s speed isn’t hitting the targets your primary equipment promised, the first place to look isn’t at your main machine—it’s at the auxiliary equipment between the primary machines, at the parts handling, at the material feed, at the inspection. That’s where 9 times out of 10, the bottleneck is. I’ve seen so many managers waste tens of thousands upgrading their main machine, only to have their line held back by a $2,000 conveyor or a $5,000 dryer. Don’t make that mistake.

If you’re ready to stop guessing why your line’s speed is capped, and get it running at the full capacity your primary equipment can deliver, get in touch. We can audit your line, point out where auxiliary equipment is holding you back, and put together a solution that gets you speed gains fast, without overspending. It doesn’t have to be complicated—sometimes the biggest speed jumps come from the smallest upgrades.

PP Hollow Sheet Machine References

  1. Industry Report: Auxiliary Equipment Impact on Manufacturing Line Productivity, National Association of Manufacturers, 2022
  2. Predictive Maintenance in Production Lines: Case Studies from the Manufacturing Engineering Society, 2021
  3. Automated Auxiliary Systems for High-Speed Assembly, Journal of Industrial Engineering, Volume 15, Issue 3, 2020

Qingdao Tongsanhegu Plastic Machinery Manufacturing Co., Ltd.
With abundant experience, we are one of the most reliable auxiliary equipment manufacturers and suppliers in China. We warmly welcome you to buy durable auxiliary equipment for sale here from our factory. Quality products and reasonable price are available.
Address: West of Xixinzhi Village, Sanlihe District Jiaozhou, Qingdao City, Shandong Province, China
E-mail: info@tongsanhegu.com
WebSite: https://www.tongsanhegumachine.com/